What happened
After refurbishing the exhaust silencer of my three-axis microlight fitted with a ROTAX 582 engine with a partly used aerosol can that a club friend had made available to me, I was getting ready to make a local flight from my airfield with a passenger, a member of my family. The cabin filled completely with smoke after applying power for take-off. Admittedly there was a wind of about 15 to 20 kt but perfectly aligned with the runway. My first mistake was to bring the throttle back to idle with a view to landing again on the centreline before the end of the runway, except that it was far too late. In the end, I decided to take off again, without looking much at the instruments, focused on the gusts shaking the machine! The smoke stopped gradually once in crosswind, and I already knew it must have been the paint burning. My passenger enjoyed the flight fully, not having had the slightest worry, which helped me a great deal. I could concentrate on finishing the circuit, but my foot was shaking on the rudder pedal, and I forgot half the radio calls. I managed to land the machine without trouble
Pilot's comments
YES, because you should not use paint that a club mate has made available simply because he renovated his own silencer with it. Always check. If you want something done right, do it yourself! The mistake was clearly not to use a high-temperature-resistant paint instead of an aerosol can meant for farm machinery...!Lessons learned:
Moderator's comment: this account illustrates the recommendation never to take a passenger on the first flight after technical work, however minor it may seem.















