What happened
New silicone carburettor intake boot came off on a two-stroke engine
Pilot's comments
I bought carburettor flanges to replace flanges that were cracked on the outside. I received sky-blue silicone flanges that looked identical to the original black rubber ones. After a few dozen minutes of flight, one flange came off the inlet manifold. That is untidy, and worse...! After checking on the ground, these new flanges are not compatible with our old Rotax 503 engines. The internal beads of these flanges do not sit perfectly in the retaining grooves on the carburettor, and in particular on the inlet manifolds, which are designed for this purpose. The dimensions do not match, either between the internal beads of the flanges and the carburettor grooves or on the inlet manifold side.As a safety measure, if you have recently replaced these flanges, please check that they are compliant. WARNING: DANGER
Lessons learned:
MODERATOR AND CNFTE COMMENT: the description of the parts in question shows that they are very probably not the original model supplied by the engine manufacturer, which has not changed the specifications or the material of the flanges it recommends. If that is indeed the case, the flanges fitted to this engine are substitute parts of doubtful reliability. WARNING: In the event of an accident, fitting this type of part could make the owner of the microlight concerned liable.















