What happened
Departing from Cuers for a crossing to Corsica, after two legs from Châtellerault in the heat, in a hurry to leave, I only looked at the oil level through the inspection hatch. The aircraft had just come out of a major service, had already flown 5 hours perfectly and I had to get back quickly. Take-off, rapid (too rapid) climb towards STP and on reaching level 55, a high-temperature warning, in particular for the rear cylinders of the Rotax 912 80 hp. I had already been over the sea for 15 min and the temperature kept rising, with the risk of damaging the head gasket and engine stoppage. Emergency return to Cuers, helped by the controller who cleared a path for me (very professional), and temperature kept in check by a descent at idle. Landing, opening the cowling: not a drop of coolant left in the expansion tank and the overflow bottle half empty. Checked by a local mechanic: no damage, no mayonnaise in the oil. Coolant topped up the next day (1 litre added cold), engine tests and a peaceful crossing to Corsica. REX for long trips when it is hot: do not be content with a glance at the oil through the hatch, remove the cowling and check the three fluids: fuel, oil and coolant. I will not forget.
Pilot's comments
Do not hesitate to remove the cowling and check the engine fluids thoroughly, especially on long legs where you climb high and fast in hot summer air. On a Rotax, coolant is just as essential as oil.Lessons learned:
The oil inspection hatch can be a false convenience, tempting you not to open the cowling and inspect everything. Convenience, the things you make us skip!















