What happened
Vibrations and loss of rpm in the initial climb on a microlight.
I was flying with my students in the JBAG and we went to LFJI because the wind was more "in line" with runway 04 than at Royan.
On the second circuit, with Oliano, while we were doing circuits, at the end of the initial climb (about 800 ft), the engine started to vibrate heavily and had also lost rpm.
I immediately took over the controls for a close-in VAR and reduced to about 2500 rpm, the speed at which the engine vibrated less.
The VAR was flown in a descent at 100 km/h and I finished with a PTU on 04.
On arrival at the parking area, some users called their mechanic (Didier MARIE), who ran tests on the engine with the cowling off and concluded that something was wrong.
Pilot's comments
The mechanic found the fault: the needle of the left carburettor had broken and fallen to the bottom of the bowl, hence a fuel supply failure through that carburettor.
He replaced it.
The microlight was ferried after repair the next morning to LFCY.
Nothing to report afterwards.
The microlight's maintenance centre is on the LFJI airfield, which shortened the investigation and repair time.
The instructor is also responsible for maintenance.
He is having the maintenance service check whether this failure is recurrent on ROTAX engines.















